Refurbished Jenga Wooden Stool - DIY
When we are talking about recycling woods, a construction area can be one of the best spot! If you are familiar with the family game called " Jenga", you could for sure see why this bench is named the Jenga bench.
With different piece of wood that I thought would be a good way to build it without too much. I liked simplicity, so seeing that I needed a better stool for my kitchen would make a great addition at home.
Download a free plan via the blog article here:
To get started with this project I had to break down all the pieces needed from the wooden plank I've found in the trash container. Because this stool only used small parts I was able to cut the thin slats with my miter saw. These pieces are just over 35 cm long for 9 cm large and for this project you will need 22 of them.
Each slat then had an edge cleaned up at the table saw with a taper sled. I first start by cleaning each pieces with the sanding machine to have a flat surface and this also allowed me to get a decent cut at the miter saw to cut the pieces to final length. Using the same process that the Jenga game, I have been able to build one piece after the other the entire bottom part then for the top and final part I just needed to put 4 pieces next to each other (if you cut them well enough, they will give you a perfect square).
I like this finish the best for reclaimed wood indoor projects as it retains the natural wood look without darkening over time.
As usual guys, I hope that those will inspire some to bring more refurbish furniture at home.
Mr ATC for another idea of housing!
Our sponsor for this project has been, Relay Shop USA: The package forwarding solution made easy and available for all... more here
Support ATC for more sustainable consumption patterns! Book here and share!
=> Hotels
=> Flights
=> Holidays homes
=> Car rentals
Popular - How To do Videos: Subscribe here
If you like or hate this article, comment below! Tell us what you think and share your opinion on your social media...
2 views